- Home
- ยป
- Our Products
- »
- Ball Valves
Ball Valves
Aball valveis a form of quarter-turnvalvewhich uses a hollow, perforated and pivoting ball (called a "floating ball") to control flow through it. It is open when the ball's hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle.[1]The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve's status.[2]
Ball valves are durable, performing well after many cycles, and reliable, closing securely even after long periods of disuse. These qualities make them an excellent choice for shutoff applications, where they are often preferred togatesandglobevalves, but they lack their fine control in throttling applications.
The ball valve's ease of operation, repair, and versatility lend it to extensive industrial use, supportingpressuresup to 1000barandtemperaturesup to 752°F (500°C), depending on design and materials used. Sizes typically range from 0.2 to 48 inches (0.5cm to 121cm). Valve bodies are made ofmetal,plastic, or metal with aceramic; floating balls are oftenchrome platedfor durability. One disadvantage of a ball valve is that they trap water in the center cavity while in the closed position. In the event of a freeze, the sides can crack due to expansion of ice forming. Some means of insulation or heat tape in this situation will usually prevent damage.Another option for cold climates is the "freeze tolerant ball valve". This style of ball valve incorporates a freeze plug in the side so in the event of a freeze up, the freeze plug ruptures, (acts as a sacrificial disk), thus making for an easy repair. Now instead of replacing the whole valve, just screw in a new freeze plug. This is commonly called freeze plug technology.
A ball valve should not be confused with a "ball-check valve", a type ofcheck valvethat uses a solid ball to preventundesired backflow.
CIM 11G Ball Valve
Minimum Order Quantity: 1 Piece
Material | Brass |
Size | 1/4" to 4" |
Usage/Application | Water |
Design | Single Piece Design |
Connector Type | Screwed |
Brand | CIM |
Valve Size | 1/4" to 4" |
Pressure | Depends on size |
Place Of Origin | Pan India |
Media | Water, Air, Gas |
Valve is certified by "the BG Technology " "Calor and American Gas Associations etc "
Ideally Suitable for distribution of LPG ,Natural and Town Gases at low pressure , Water , Saturated steam, Compressed Air, Vsacuum etc. Can be used for domestic and indusstrial plumbing , heating and pneumatic systems , oil and petrol services etc.
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Jute Bag
Additional Information:
- Item Code: CIM-11G
- Delivery Time: Ready Stock
- Packaging Details: Box
Brass Ball Valve
Material | Brass |
Size | 1/4" to 4" |
Usage/Application | Industrial |
Model Name/Number | 1008B |
Design | Single Piece Design |
Connector Type | Screwed |
Brand | Zoloto |
Valve Size | 1/4" to 4" |
Pressure | Depends on size |
Place Of Origin | Pan India |
Media | Gas, Water, Air |
Given our immense industry experience and reputation we are offering Brass Ball Valve to our clients. Offered product range is durable enough and experts have utilized excellent techniques and material for production of this. This product is demanded for extensive application in industrial processes. Experts have utilized latest technology for production. It has robust surface.
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Jute Bag
Additional Information:
- Item Code: 1008B
- Delivery Time: Ready Stock
- Packaging Details: Box
Forged Brass Ball Valves
Material | Brass |
Size | 1/4" to 4" |
Usage/Application | Water |
Design | Single Piece Design |
Connector Type | Screwed |
Brand | Sant, Zoloto, Kartar |
Valve Size | 1/4" to 4" |
Pressure | Depends on size |
Place Of Origin | Pan India |
Media | Water, Air, Gas |
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Jute Bag
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Box
Chutky Ball Valve
Minimum Order Quantity: 1 Piece
Size | 1/4" to 4" |
Usage/Application | Industrial |
Pressure | High Pressure |
Connector Type | Screwed |
Model Name/Number | CBV-11 |
Brand | Generic |
Material | Brass |
Design | Single Piece Design |
Temperature Of Media | Low Temperature, High Temperature, Medium Temperature |
WOG Rating | 150 |
Assisted by a team of highly skilled professionals, we bring forth a broad assortment of Mini Ball Valve that is used in various industries for blowing a controlling air, gas and water. Our offered range is manufactured using supreme quality material and sophisticated technology under the guidance of our skilled professionals. In addition to this, we are offering these products in different specifications as per the requirements of the clients.
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Box, Cartoon
Mini Ball Valve
Minimum Order Quantity: 1 Piece
Material | Brass |
Size | 3/8", 1/4", 1/2", 3/4", 1" |
Brand | Generic |
Pressure | Normal |
Usage/Application | Water |
Model Name/Number | MBV-10 |
Design | Single Piece Design |
Connector Type | Screwed |
Color | Chrome |
End Connection | Threaded |
Temperature Of Media | High Temperature, Low Temperature, Medium Temperature |
WOG Rating | 150 |
Product Details:
Material | Forged Brass |
Size | 15mm to 1000mm |
Usage/Application | Industrial |
Brand | Yash, Generic, Matrix, PEC |
Pressure | PN25 |
Valve Size | 10, 12, 15, 20, 25, 32mm |
Color | Chrome |
End Connection | Screwed |
Model Name/Number | Mini 11 |
Assisted by a team of highly skilled professionals, we bring forth a broad assortment of Mini Ball Valve that is used in various industries for blowing a controlling air, gas and water. Our offered range is manufactured using supreme quality material and sophisticated technology under the guidance of our skilled professionals. In addition to this, we are offering these products in different specifications as per the requirements of the clients.
Features:
-
Completely reliable
-
Sturdy design
-
Long lasting life
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Box, Cartoon
RB Ball Valve
Minimum Order Quantity: 1 Piece
Material | Brass |
Size | 1/4" to 4" |
Brand | RB |
Usage/Application | Industrial |
Pressure | High Pressure |
Model Name/Number | RB-1 |
Design | Single Piece Design |
Connector Type | Screwed |
Temperature Of Media | Low Temperature, High Temperature, Medium Temperature |
WOG Rating | 150 |
R B MAKE Forged Brass Ball Valve R B Italy Make:
- R B Italy Make Forged Brass Ball Valve Bore type Full Bore Hot Stamping as per CW617N Body Nickel Plated Ball Forged
- brass and Chromium coated Seat PTFE Threading as per ISO 228-1 BSP P Testing As per ISO 5208 Manufacturing MSS SP
- 110 Standard Special Feature Quarter turn
- Art.No 1510
- Series UNI-SFERArt. 1510Full bore ball valve, F/F threaded, with steel handle.
POS. | PART NAME | MATERIAL-MATERIALS MATERIAUX-WERKSTOFF- MATERIAL | N°P |
---|---|---|---|
1 | BODY | OTTONE CW617N UNI EN 12165 | 1 |
2 | END CONNECTION | OTTONE CW617N UNI EN 12165 | 1 |
3 | BALL | OTTONE CW617N UNI EN 12165 | 1 |
4 | STEM | OTTONE CW614N UNI EN 12164 | 1 |
5 | HANDLE | ACCIAIO DC04 EN 10020 | 1 |
6 | BALL SEAT | P.T.F.E | 2 |
7 | ANTIFRICTION SEAT | P.T.F.E | 1 |
8 | O-RING | FKM | 2 |
9 | O-RING | NBR | 2 |
10 | NUT | ACCIAIO CL 04 | 1 |
MISURA SIZE | DN | BOX | MASTER BOX | CODICE CODE | I | L | ØH | Ch | R | h | Kv | PN | Kg |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/4'* | 8 | 25 | 50 | 1710020000 | 11 | 51,5 | 23 | 20 | 96 | 42 | 5,4 | 64 | 0,15 |
3/8'* | 10 | 25 | 50 | 1710030000 | 11,4 | 51,5 | 23 | 20 | 96 | 42 | 6 | 64 | 0,14 |
1/2' | 15 | 50 | 100 | 1510040000 | 12 | 47,5 | 30 | 25 | 96 | 45 | 16,3 | 30 | 0,18 |
3/4' | 20 | 25 | 50 | 1510050000 | 12 | 53 | 36 | 31 | 121 | 56,5 | 29,5 | 30 | 0,28 |
1' | 25 | 20 | 40 | 1510060000 | 14,5 | 65,5 | 43,5 | 38 | 121 | 59 | 43 | 30 | 0,43 |
1'1/4 | 32 | 10 | 20 | 1510070000 | 16 | 76,5 | 53 | 48 | 151 | 72,5 | 89 | 25 | 0,74 |
1'1/2 | 40 | 6 | 12 | 1510080000 | 18 | 89 | 65 | 54 | 151 | 78,5 | 230 | 25 | 1,06 |
2' | 50 | 4 | 8 | 1510100000 | 19 | 103 | 80 | 67 | 160 | 91,5 | 265 | 25 | 1,70 |
2"1/2* | 65 | 2 | 4 | 1710120000 | 30,2 | 152 | 111 | 90 | 206 | 123 | 540 | 25 | 3,71 |
3"* | 80 | - | 4 | 1710140000 | 33,3 | 177 | 136 | 105 | 206 | 133 | 873 | 25 | 5,90 |
4* | 100 | - | 2 |
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Box
Butterfly Ball Valve
Minimum Order Quantity: 1 Piece
Usage/Application | Water |
Valve Size | 1/2" to 16" |
Brand | Yash |
Material | Brass |
End Connection | Screwed |
Pressure | High Pressure |
Port Size | 1/2" |
Power | Manual |
Operator | Lever |
Media | Gas, Water, Air |
Temperature Of Media | Medium Temperature, High Temperature, Low Temperature |
Operation Type | By Actuator, By Lever, By Gear |
(where there is space crunch). BODY :Forged brass BALL :Forged brass Hard Chrome Plated Mirror Smooth Finish SEAT :PURE P.T.F.E CONICAL ARC CUTSTOM SEALS :DOUBLE O RINGS OF H-NBR(Hydro Generated Nitrile Rubber)NUT :Nyloc self-locking ENDS :BSP Female
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Box
3 Way Ball Valve
Minimum Order Quantity: 1 Piece
Brand | Ajanta |
Usage/Application | Industrial |
Model Name/Number | WBV-12 |
Design | 2 Pc Design |
Connector Type | Screwed |
Size | 1/2" to 12" |
Number of Ways | 3 |
Material | Brass |
Pressure | High Pressure |
Temperature Of Media | High Temperature, Low Temperature, Medium Temperature |
WOG Rating | 300, 600, 150 |
3 Way ball are readily available with us .
Key Specifications/Special Features:
DN15 piece SS thread end ball valve
Material:
Body: SS
Ball: SS304/316
Bolt: SS316
Additional Information:
- Item Code: WBV-2
- Production Capacity: 55000/Monthly
- Delivery Time: Ready Stock
- Packaging Details: Loose
High Pressure Ball Valves
Minimum Order Quantity: 1 Piece
Brand | Rexroth |
Valve Size | 1/2" to 16" |
Size | 1/2" to 14" |
Material | Stainless Steel |
Pressure | High Pressure |
Design | Single Piece Design |
Model Name/Number | HPBV1 |
End Connection | Screwed |
Additional Information:
- Item Code: HPBV1
- Production Capacity: 100000Nos/Monthly
- Delivery Time: Ready Stcok
- Packaging Details: Carton
Screwed End Ball Valve
Minimum Order Quantity: 1 Piece
Usage/Application | Water |
Pressure | Low Pressure |
Valve Size | 1/2" to 16" |
Material | Cast Iron |
Model Name/Number | CI-12 |
Size | 1/2" to 20" |
Brand | Generic |
Color | Black |
Class Rating | #800 |
Constructed with the highest quality materials and in accordance with international standards; our valves are offered with several end connections such as socket weld offered in sizes from 1/2" to 2", in Full bore.
Features & Benefits
· Investment cast body construction.· Blow out proof stem
· Anti static device.
· Three-piece split body design
· Double body sealing provided (O-ring, Gasket )
· Fire safe in compliance with API 607
· Direct Mounting of actuator
· Unique Gland sealing arrangement
· Bearing provided on top to minimize O-ring wear/tear.
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Loose
SS Ball Valve
Minimum Order Quantity: 1 Piece
Brand | Generic |
Material Grade | CF8M |
Material | Stainless Steel |
Steel Grade | CF8M |
End Connection Type | Screwed |
Size | 1/2" to 4" |
Valve Size | Depends On size |
Media | Gas, Air, Water |
Automation Grade | Manual |
We are available with different types of ball valve with difference in MOC:
- SS
- Brass
- CI
- CS
- DI
- in brands like
- AUDCO
- LNT
- SAP
- ACRON
- ATAM
- QINN
- SIR
- KARTAR
- RB
- AND many more
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Loose
Gas Ball Valve
Minimum Order Quantity: 1 Piece
Brand | Generic |
Color | Gun Metal |
Body Material | Brass |
Finishing | Chrome |
Model Name/Number | GBV-290 |
Size | 1/4" to 2" |
Media | Gas |
Material | Brass |
Usage/Application | Air, Water, Gas |
Body Type | Brass |
- Cold working pressure
- Mirror-finished solid ball
- Fine-grained PTFE seats
- Fire-safe
- Cavity Pressure Relief mechanism
- BloLeak-tight stem sealingwout-proof stem
- Antistatic feature
Additional Information:
- Item Code: GBV-29
- Production Capacity: 1250000/Monthly
- Delivery Time: Ready Stock
- Packaging Details: Loose, Box, Carton
Three Way Ball Valve
Minimum Order Quantity: 1 Piece
Brand | Various |
Usage/Application | Air, Water, Gas, Industrial |
Model Name/Number | TWBV-129 |
Design | 2 Pc, 3Pc, 1Pc |
Connector Type | Screwed |
Size | 1/2" to 12" |
Number of Ways | 3 |
Material | PVC, CPVC, Upvc, Brass, SS, CI, CS & SS |
Pressure | High Pressure |
Temperature Of Media | Medium Temperature, Low Temperature, High Temperature |
WOG Rating | 150 |
Additional Information:
- Item Code: TWBV-23
- Production Capacity: 500000/Monthly
- Delivery Time: Ready Stock
- Packaging Details: Box, Ready Stock
Industrial Ball Valve
Minimum Order Quantity: 1 Piece
Material | CPVC, PVC, UPVC, SWR, SS, Brass, Gun Metal, Cast Iron, Cast Steel |
Pressure | High Pressure |
Brand | L&T, Audco, Kirloskar, Kartar, Zoloto |
Temperature Of Media | High Temperature |
Usage/Application | Air, Water, Gas, Industrial |
Size | 1/2" to 20" |
Model Name/Number | IBV-189 |
Design | 2 Pc, 3Pc, 1Pc |
Connector Type | All type |
Color | Various |
WOG Rating | 150, 300, 600 |
We are the authorized dealer for:
- ACRON
- Audco
- sap
- RB
- LNT
- AUDCO
Specifications:
Part Name | Material Option |
Body | ASTM A 216 WCB / A 217 WC6 / A 217 WC9 / A 217 C5 / A 217 C12 / A 351 CF8 / A 351 CF8M / A 351 CF3 / A 351 CF3M / A 352 LCB |
Side Piece | ASTM A 216 WCB / A 217 WC6 / A 217 WC9 / A 217 C5 / A 217 C12 / A 351 CF8 / A 351 CF8M / A 351 CF3 / A 351 CF3M / A 352 LCB |
Ball | ASTM A 351 CF8 / A 351 CF8M / A 182 F304 / A 182 F316 / A 182 F 6a |
Body Seal | PTFE / Graphoil / Spiral Wound SS 316 with Graphoil |
Seats | PTFE / GET / Graphite filled PTFE |
Seat Retainer | ASTM A 216 WCB / A 217 WC6 / A 217 WC9 / A 217 C5 / A 217 C12 / A 351 CF8 / A 351 CF8M / A 351 CF3 / A 351 CF3M / A 352 LCB |
Stem | ASTM A 182 F304 / A 182 F316 / A 182 F 6a |
Trunnion | ASTM A 216 WCB / A 217 WC6 / A 217 WC9 / A 217 C5 / A 217 C12 / A 351 CF8 / A 351 CF8M / A 351 CF3 / A 351 CF3M / A 352 LCB |
Gland Housing | Graphite ASTM A 216 WCB / A 217 WC6 / A 217 WC9 / A 217 C5 / A 217 C12 / A 351 CF8 / A 351 CF8M / A 351 CF3 / A 351 CF3M / A 352 LCB |
Top Plate | ASTM A 216 WCB / A 217 WC6 / A 217 WC9 / A 217 C5 / A 217 C12 / A 351 CF8 / A 351 CF8M / A 351 CF3 / A 351 CF3M / A 352 LCB |
Spring | Spring Steel / SS 304 / SS 316 / Inconel X 750 |
'O' Ring | VITON / Silicon Rubber / Graphite |
Gland | ASTM A 182 F304 / A 182 F316 / A 182 F 6a |
Gland Packing | Graphoil / PTFE |
Stem Packing | Graphite filled PTFE / Graphoil |
Gland Nut | Stainless Steel |
Stem Nut | Stainless Steel |
Lever | Carbon Steel with PVC |
Gear Box / Actuator | Manufacturer's Standard |
Studs / Bolts | ASTM A 193 B7 / A 193 B7M / A 193 B8 / A 193 B8M / A 320 L7 |
Nut | ASTM A 194 2H / A 194 B7M / A 194 B / A 194 8M / A 194 4/7 |
Additional Information:
- Item Code: IBV-189
- Production Capacity: 25000/Monthly
- Delivery Time: Ready Stock
- Packaging Details: Loose
Floating Ball Valves
Minimum Order Quantity: 1 Piece
Material | SS, Brass |
Size | 1/2" to 12" |
Pressure | Pn1.0 |
Brand | Generic |
Model Name/Number | FBV-129 |
Design Standard | As per IS |
Design | 1Pc, 2Pc, 3Pc |
The floating ball valve utilizes natural line pressure to press and seal the ball against the downstream seat. The line pressure is exposed to a greater surface area - the entire upstream face of the ball, which is an area equal to the actual pipe size.
End Connections: - Flanged End, Screwed End, Socket Weld End, Butt Weld End and Wafer End.
ISO Top Details as per ISO 5211 / End To End as per standards BS 16.10
Features & Benefits:
- Investment cast body construction.
- Blow out proof stem
- Anti static device.
- Two-piece split body design
- Double body sealing provided (O-ring, Gasket )
- Fire safe in compliance with API 607
- Direct Mounting of actuator for sizes 1 inch and above
- Unique Gland sealing arrangement
- Bearing provided on top to minimize O-ring wear/tear.
End Connections:
- Flanged End, Screwed End, Socket Weld End, Butt Weld End and Wafer End
- ISO Top Details as per ISO 5211 / End To End as per standards BS 16.10
- Design standard API6D EN17292 (BS 5351)
Materials:
- Body, Ball & Seat: WCB/CF8/CF8M /Others On request
- Seats & Seals: PTFE/RPTFE/PEEK/CFT/Others on Request
- End Connections: Flanged End
Additional Information:
- Item Code: FBV-1289
- Production Capacity: 150000/Monthly
- Delivery Time: Ready Stock
- Packaging Details: Loose
Shenco Ball Valve
Minimum Order Quantity: 1 Piece
Material | Cast Iron |
Size | 1/4" to 4" |
Brand | Shenco |
Usage/Application | Industrial |
Pressure | High Pressure |
Model Name/Number | CI-56 |
Design | 2 Pc Design |
Connector Type | Flanged End |
Temperature Of Media | High Temperature, Low Temperature, Medium Temperature |
WOG Rating | 600, 150, 300 |
Additional Information:
- Item Code: SBV-1
- Production Capacity: 158000/Month
- Delivery Time: Ready Stock
- Packaging Details: Loose
Flowtek Ball Valve
Brand | Flowtek |
Material Grade | CF8M |
Material | Stainless Steel |
Steel Grade | CF8M |
End Connection Type | Screwed |
Size | 1/2" to 4" |
Valve Size | Depends On size |
Media | Water, Air, Gas |
Automation Grade | Manual |
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Box, Cartoon
CI Ball Valve
Minimum Order Quantity: 1 Piece
Material | Brass |
Usage/Application | Water |
Pressure | High Pressure |
Design | Single Piece Design |
Connector Type | Screwed |
Size | 1/2" to 20" |
Model Name/Number | CI-21B |
Brand | Sant, Zoloto, Kirloskar, Kartar |
Certification | IS |
Temperature Of Media | High Temperature, Medium Temperature, Low Temperature |
WOG Rating | 150 |
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Loose
Socket Weld Ball Valve
Minimum Order Quantity: 1 Piece
Material | Cast Steel |
Size | 1/2" to 20" |
Brand | L&T, Audco, Kirloskar, Kartar, Zoloto |
Usage/Application | Industrial |
Pressure | High Pressure |
Model Name/Number | SWBV-19 |
Design | 2 Pc, 3Pc, 1Pc |
Connector Type | Socket Weld |
Temperature Of Media | Low Temperature, Medium Temperature, High Temperature |
WOG Rating | 150 |
We offer a complete line of two and three-piece ball valves in either floating design, ideally suited for precise control and positive shutoff. The efficient opening and closing system employed by quarter turn ball valves makes them an excellent choice for shutoff applications, especially in the oil & gas industry.
Constructed with the highest quality materials and in accordance with international standards; our valves are offered with several end connections such as socket weld offered in sizes from 1/2" to 2", in Full bore.
Features & Benefits
· Investment cast body construction.· Blow out proof stem
· Anti static device.
· Three-piece split body design
· Double body sealing provided (O-ring, Gasket )
· Fire safe in compliance with API 607
· Direct Mounting of actuator
· Unique Gland sealing arrangement
· Bearing provided on top to minimize O-ring wear/tear.
Materials
Body, Ball & Seat: WCB/CF8/CF8M /Others On request
Seats & Seals: DELRIN/RPTFE (#800)
PTFE (#400)
End Connections: Screwed, Socket & Butt Weld End
Codes & Standards:
· End To End as per standards BS 16.10· Flange details as per ANSI ( B16.5 )
Additional Information:
- Item Code: SWBV-19
- Production Capacity: 456000/Monthly
- Delivery Time: Ready Stock
- Packaging Details: Loose
PP Ball Valves
Minimum Order Quantity: 1 Piece
Material | PP |
Usage/Application | Industrial |
Pressure | High Pressure |
Design | 2 Pc, 3Pc, 1Pc |
Connector Type | Flanged End |
Size | 1/2" to 8" |
Brand | Marvex/CPI |
Model Name/Number | PPBV-99 |
End Connection Type | Flangend |
Color | White, Orange, Red |
Temperature Of Media | High Temperature, Medium Temperature, Low Temperature |
WOG Rating | 150, 300, 600 |
Additional Information:
- Item Code: PPBV-88
- Production Capacity: 150000/Monthly
- Delivery Time: Ready Stock
- Packaging Details: Loose
Reduced Port Ball Valve
Minimum Order Quantity: 1 Piece
Material | Brass |
Brand | Sant, Zoloto, Kirloskar, Kartar, Veenus |
Size | 1/2" to 20" |
Usage/Application | Air, Water, Gas, Industrial |
Pressure | High Pressure |
Model Name/Number | RPBV-87B |
Design | 2 Pc, 3Pc, 1Pc |
Connector Type | Screwed |
Valve Size | 1/2" to 20" |
Place Of Origin | Pan India |
Temperature Of Media | Medium Temperature, High Temperature, Low Temperature |
WOG Rating | 150 |
A range of reduced bore, flanged, free floating (seat supported) ball valves, incorporating mounting flanges to BS EN ISO 5211, featuring soft, metal and carbon seated designs.
Reduced bore body, flanged construction in carbon steel, stainless steel and special alloys Flexing soft seat design for superior shut-off across a range of pressures with minimum operating torque.Fire test certified. All sizes and pressure ratings are covered by approved certification.
Features & Benefits:
- Investment cast body construction.
- Blow out proof stem
- Anti static device.
- Two-piece split body design
- Double body sealing provided (O-ring, Gasket )
- Fire safe in compliance with API 607
- Direct Mounting of actuator for sizes 1 inch and above
- Unique Gland sealing arrangement
- Bearing provided on top to minimize O-ring wear/tear.
Materials:
- Body, Ball & Seat: WCB/CF8/CF8M /Others On request
- Seats & Seals: PTFE/RPTFE/PEEK/CFT/Others on Request
- End Connections: Flanged End
Codes & Standards:
- End To End as per standards BS 16.10
- Flange details as per ANSI ( B16.5 )
- Testing standard BS 6755/ EN 12266 - Part 1
- ISO Top Details as per ISO 5211
Additional Information:
- Item Code: RPBV-189B
- Production Capacity: 150000/Monthly
- Delivery Time: Ready Stock
- Packaging Details: Loose Material
3 Piece Forged Ball Valve
Minimum Order Quantity: 1 Piece
Size | 1/2" to 20" |
Brand | L&T, Audco, Kirloskar, Kartar, Zoloto |
Usage/Application | Industrial |
Pressure | High Pressure |
Model Name/Number | PDBV-1 |
Design | 3 Piece |
Connector Type | Screwed |
Size/Dimension | 1/2" to 20" |
Material | Carbon Steel |
Pressure Rating | #800 |
End Connection Type | Screwed |
Temperature Of Media | High Temperature, Medium Temperature, Low Temperature |
WOG Rating | 150 |
Owing to the years of industrial presence, we are indulged in offering to our patrons a broad spectrum of 3 Piece Ball Valve. Offered products are designed using optimum grade factory material.
Additional Information:
- Item Code: PDBV3
- Production Capacity: 150000/Monthly
- Delivery Time: Ready Stock
- Packaging Details: Loose
Cast Iron Ball Valve
Minimum Order Quantity: 1 Piece
Material | Cast Iron |
Usage/Application | Water |
Pressure | High Pressure |
Design | Single Piece Design |
Connector Type | Flanged End |
Size | 1/2" to 20" |
Model Name/Number | CI-18B |
Brand | Sant, Zoloto, Kirloskar, Kartar |
Certification | IS |
Temperature Of Media | High Temperature, Medium Temperature, Low Temperature |
WOG Rating | 150 |
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Loose
Teflon PTFE Lining Ball Valve
Minimum Order Quantity: 1 Piece
Valve Size | 12 inch |
Usage/Application | Industrial |
Material | Cast Steel |
Color | Red |
Media | Air, Water, Gas & Chemicals |
Pressure | High Pressure |
Additional Information:
- Item Code: TLBV-12
- Production Capacity: 895000/Monthly
- Delivery Time: Ready Stock
- Packaging Details: Loose
SIR Sluice Valve
Minimum Order Quantity: 1 Piece
Usage/Application | Industrial |
Pressure | High Pressure |
Size | 1/2" to 16" |
Material | Cast Iron |
Model Name/Number | SIRSV |
Brand | SIR |
Valve Size | 1.1/2" to 24" |
Color | Black & Blue |
Bonnet Material | Brass |
Designed As Per Bs | IS-14846 |
Media | Water, Gas, Air |
Temperature Of Media | High Temperature, Medium Temperature, Normal Temperature |
Cast Iron Double Flanged Sluice Valves as per IS 14846: 2000 with G.M. Internals and IS: 6603 12CR13 S.S. Spindle drilled as per IS: 1538 with body design preferred dimensions (PD) ) type. These valves can be supplied with S.S. Working parts.
Additional Information:
- Item Code: SIRSV
- Production Capacity: 15000
- Delivery Time: Ready Stock
- Packaging Details: Loose
SIR Non Return Valves
Material | Cast Iron |
Valve Size | 4 inch |
Brand | Sir |
Pressure | PN1.0/PN1.6 |
Construction | Cast Iron |
Media | Water |
End Connection | Flanged End |
Design Type | As per IS |
Certification | CE, EIL, IBR |
Working Temperature | 120 deg |
Class | Heavy |
|
Additional Information:
- Item Code: SIRNRV01
- Production Capacity: 1500
- Delivery Time: Ready Stock
- Packaging Details: Loose
SS Ball Valve
Brand | Generic |
Material Grade | CF8M |
Material | Stainless Steel |
Steel Grade | CF8M |
End Connection Type | Screwed |
Size | 1/2" to 4" |
Valve Size | Depends On size |
Media | Air, Gas, Water |
Automation Grade | Manual |
We are available with different types of ball valve with difference in MOC:
- SS
- Brass
- CI
- CS
- DI
- in brands like
- AUDCO
- LNT
- SAP
- ACRON
- ATAM
- QINN
- SIR
- KARTAR
- RB
- AND many more
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Loose
Flange Ball Valve
End Connection | Flanged |
Size | 1/2" to 16" |
Brand | L&T, Audco, Sant, Kirloskar, Kartar, Zoloto etc |
Model Name/Number | FBV-11 |
Material | Stainless Steel, Cast Steel, Cast Iron, Ductile Iron |
Design | Single Piece, Two Piece, Three Piece |
Number Of Holes | 4 |
Usage/Application | Industrial |
Color | Various |
Flanged Series ball valves feature a floating ball design for low torque and increased cycle life. These rugged ball valves are ideal for industrial applications.
Fire Safe - Certified to API 607:- Flanged Series valves with graphite stem seals have been thoroughly fire tested and meet these standards.
End Connections meet ASME Class150/300.
Features & Benefits:
- Investment cast body construction.
- Blow out proof stem
- Anti static device.
- Two-piece split body design
- Double body sealing provided (O-ring, Gasket )
- Fire safe in compliance with API 607
- Direct Mounting of actuator for sizes 1 inch and above
- Unique Gland sealing arrangement
- Bearing provided on top to minimize O-ring wear/tear.
Fire Safe:
- Certified to API 607:- Flanged Series valves with graphite stem seals have been thoroughly fire tested and meet these standards
- End Connections meet ASME Class150/300
Materials:
- Body, Ball & Seat: WCB/CF8/CF8M /Others On request
- Seats & Seals: PTFE/RPTFE/PEEK/CFT/Others on Request
- End Connections: Flanged End
Codes & Standards:
- End To End as per standards BS 16.10
- Flange details as per ANSI ( B16.5 )
- Testing standard BS 6755/ EN 12266 - Part 1
- ISO Top Details as per ISO 5211
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Loose
Lock Ball Valve
Minimum Order Quantity: 1 Piece
Material | Brass |
Size | 1/4" to 4" |
Brand | Brass |
Usage/Application | Water |
Pressure | High Pressure |
Model Name/Number | LB-1 |
Design | Single Piece Design |
Connector Type | Screwed |
Temperature Of Media | High Temperature, Medium Temperature, Low Temperature |
WOG Rating | 150 |
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Jute Bag
Additional Information:
- Delivery Time: Ready Stock
- Packaging Details: Box