Call 08047656107 81% Response Rate

Send Email

Industrial Valves and Controllers

Avalveis a device that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, orslurries) by opening, closing, or partially obstructing various passageways. Valves are technicallyfittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. The word is derived from the Latinvalva, the moving part of a door, in turn fromvolvere, to turn, roll.

The simplest, and very ancient, valve is simply a freely hinged flap which drops to obstruct fluid (gas or liquid) flow in one direction, but is pushed open by flow in the opposite direction. This is called acheck valve, as it prevents or "checks" the flow in one direction. Moderncontrol valvesmay regulatepressureorflowdownstream and operate on sophisticatedautomationsystems.

Valves have many uses, including controlling water forirrigation, industrial uses for controlling processes, residential uses such as on/off and pressure control to dish and clothes washers and taps in the home. Even aerosols have a tiny valve built in. Valves are also used in the military and transport sectors.

Cast Iron Gate Valve
  • Cast Iron Gate Valve
  • Cast Iron Gate Valve
  • Cast Iron Gate Valve

Cast Iron Gate Valve

Product Price: Rs 430 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Size1/2" to 20"
MaterialCast iron
End ConnectionFlange End
BrandSant, Zoloto, L&T, Kirloskar, Kalpana & Advance
End Connection TypeFlanged
Temperature Of MediaMedium Temperature, High Temperature, Low Temperature
Usage/ApplicationAir, Water, Gas
Connection TypeFlange end
Product Details:
Size 15mm
Material Cast Iron
Brand Sant/ Zoloto/ SIR/ Kartar/ WJ/ Atam/ Kranti
End Connection Type Flanged
Usage/Application Industrial
Connection Type Flanged
With enriched industrial experience and expertise, our organization is actively committed to offering our Cast Iron Sluice Valve.

Specifications:
  • Product Standard: IS:14846
  • Body Material cum Standard: Cast Iron IS:210 Gr.FG200
  • Description: Bolted Bonnet, Inside Screw & Non-Rising Stem
  • Type of Seat: Renewable seat
  • Type of Disc: Solid wedge
  • Trim: Cu-Alloy Rings, stem SS (12 Cr.12)
  • Gland Packing: Jute & Hemp / Rubber
  • End Details: Flanges as per IS:1538 FF drilled

Other Details:
Nominal Size Nominal Size (Inches) F H W D T N x d K
50 2 178±2 325 225 165 16 4 x 19 125
65 2.1/2 190±2 360 225 185 16 4 x 19 145
80 3 203±2 400 225 200 21 4 x 19 160
100 4 229±2 450 320 220 22 8 x 19 180
125 5 254±2 485



Additional Information:

  • Delivery Time: Ready Stock
  • Packaging Details: Loose
Get Best QuoteRequest A Callback
Cast Iron Sluice Valve
  • Cast Iron Sluice Valve
  • Cast Iron Sluice Valve

Cast Iron Sluice Valve

Product Price: Rs 140 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Size3 " to 24"
BrandSant, Zoloto, Kirloskar, Kartar & Kalpana
End Connection TypeFlange
PressureHigh
MaterialCast iron
MediaGas, Water
ColorBlack, Red, Blue
Automation GradeManual
Temperature Of MediaHigh Temperature, Medium Temperature, Low Temperature
PERFECT ENGINEERING COPORATION The company is recognized as a highly trusted supplier of best quality Cast Iron Sluice Valve Kirloskar. This superior range of sluice valve is available in accordance with the quality norms of the industry. This valve ensures product innovation, quality and client satisfaction. Our range of cast iron sluice valve assures accurate control & flawless performance while in operation. Further, this valve is available at a reasonable price..

Features:


  • Innovative design
  • Superior performance
  • Accurate control


Additional Information:

  • Delivery Time: Ready stock
  • Packaging Details: loose
Get Best QuoteRequest A Callback
Cast Iron Sluice Gate Valve
  • Cast Iron Sluice Gate Valve
  • Cast Iron Sluice Gate Valve

Cast Iron Sluice Gate Valve

Product Price: Rs 185 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Model Name/NumberCI 1A
Size1/2" to 20"
MaterialCast iron
End ConnectionFlange End
BrandSant, Zoloto, Audco, Advanced & kartar
End Connection TypeFlanged
Temperature Of MediaMedium Temperature, High Temperature, Low Temperature
Usage/ApplicationAir, Water, Gas
Connection TypeFlange end
Cast Iron Sluice Gate ValveProduct Price: Rs 1,400 / PieceGet Best Price

 

Product Details:
Material Cast Iron
Usage/Application Industrial
Color Black, Blue, Red
Brand Sant, Zoloto, Kirloskar, Leader, Atam, Kartar
Size/Dimension 15mm
Country of Origin Made in India
PERFECT ENGINEERING CORPORATION
Cast Iron Sluice Valve RANGE: as per IS 14846 Size 32 to 1500mm(Non Rising & Rising) as per BS 5163SIZE: 50mm to 600mm (Non Rising)Pressure Rating up to PN 1.6Spindle :- Bronze / SS

  • Rigid and sturdy design
  • Low pressure loss across the valve
  • Available in Non Rising as well as in Rising Spindle
Type.
  • Suitable for clear water up to 45 C and 5000 ppm
  • turbidity, other fluids with maximum pressure /
  • temperature conditions within the scope of
  • IS:14846
  • Long service life and leak-tightness even after
  • thousands of open / close cycles


Additional Information:

  • Delivery Time: Ready stock
  • Packaging Details: Loose
Get Best QuoteRequest A Callback
Audco Gate Globe Check Valves
  • Audco Gate Globe Check Valves
  • Audco Gate Globe Check Valves

Audco Gate Globe Check Valves

Product Price: Rs 800 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandAudco
Body MaterialCast Iron
Usage/ApplicationIndustrial
ColorBlack, Blue & Silver
Driving ModeManual
Test PressurePN 1.0/PN1.6
Product Details:
Usage/Application Industrial
Brand Audco
Material Cast Iron
Valve Size 1000mm
Pressure PN1.0 / PN1.6
Media Air, Water, Gas
End Connection Screwed, Socket, Flanged
Certification CE, EIL, IBR

Audco Valves manufactures a wide variety of Gate, Globe & Check Valves in bolted-bonnet design.

The valves are approved by the global majors in oil & gas and power and have a reputation for reliable performance in critical services, across the globe.

Valves in bolted bonnet construction are available in pressure classes from 150 to 2500, in a variety of materials and end-connections.


Gate Valves:

  • API 600/ISO 10434
  • 2" to 72"
  • ASME class 150 to 2500

 

Salient Features:

  • Body and bonnet - Cast with uniform sections, precision machined.
  • Body: Straight through port without recesses except in the seat area - Minimum resistance to flow, turbulence and erosion.
  • Flex wedge: Guide slots in the wedge engage with integral guide ribs in the body, Stem-to-wedge contact close to wedge centre - Better sealing, smoother operation.
  • Seal-welded seat ring - Eliminates leakage path between seat ring and body, does not loosen up due to temperature fluctuations or vibration.
  • Stem - One-piece construction with forged T-head - Long service life, smoother operation.


Globe Valves:

  • BS 1873
  • 2" to 24"
  • ASME 150 to 2500

 

Salient Features:

  • Body and Bonnet - Cast with uniform sections, precision machined.
  • In-situ hard-faced body seat - Eliminates leakage path between seat ring and body.
  • Guided plug-type disc, Free-floating stem-disc connection - Uniform seating.


Check Valves:

  • BS 1868
  • 2" to 36"
  • ASME 150 to 2500

 

Salient Features:

  • Body and Bonnet - Cast with uniform sections, precision machined.
  • Body: Permits full swing of disc on downstream side - Lower flow resistance and disc erosion.
  • Disc: Internally-hinged - No opening on the body, higher integrity.
  • Disc secured to hinge using lock nut and pin.
  • Disc free to rotate to avoid localized wear.
 

Additional Information:

  • Delivery Time: Ready stock
  • Packaging Details: Loose
Get Best QuoteRequest A Callback
SS Disc Check Valves
  • SS Disc Check Valves
  • SS Disc Check Valves

SS Disc Check Valves

Product Price: Rs 230 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandForbes Marshall Spirax, Audco, L&T, Flowserve, Flowtek
Size1/2" to 20"
ShapeRound
MaterialStainless Steel
Valve Size1/2" to 20"
PressurePN1.0/PN1.6
MediaAir
End ConnectionButt Weld
Design TypeRoud
CertificationIBR
Product Details:
Brand Forbes Marshall Spirax, Audco, L&T, Flowserve, Flowtek
Size 15mm
Shape Round
Model Name/Number 7890
Material Stainless Steel
Valve Size 1/2"
Pressure 1.5Mpa
Media Air, Water, Gas
End Connection Screwed, Socket, Flanged
We are Dealers and stockiest in very high quality of Disc Check Valves.     


Additional Information:

  • Delivery Time: Ready stock
  • Packaging Details: Loose
Get Best QuoteRequest A Callback
Cast Iron Globe Valve

Cast Iron Globe Valve

Product Price: Rs 660 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandSant, Zoloto, Kirloskar & Audco
Body MaterialCast Iron
Usage/ApplicationIndustrial
Size1/2" to 12"
Valve TypeManual
MaterialCast iron
MediaGas, Oil, Water
Automation GradeManual
Driving ModeManual
Product Details:
Brand IPV
Usage/Application Industrial
Pressure High Pressure
Model Name/Number Cast Iron Globe Valve
Size 1000mm
Valve Type Manual
Material Cast Iron
Media Oil, Water, Gas
Automation Grade Manual

With prosperous industry practice, our entity has gained huge appreciation in the market by presenting Globe Valves to our respected patrons.


Salient Features :

  • Body and bonnet - Cast with uniform sections, precision machined.
  • Body : Straight through port without recesses except in the seat area - Minimum resistance to flow, turbulence and erosion.
  • Flex wedge: Guide slots in the wedge engage with integral guide ribs in the body, Stem-to-wedge contact close to wedge centre - Better sealing, smoother operation.
  • Seal-welded seat ring - Eliminates leakage path between seat ring and body, does not loosen up due to temperature fluctuations or vibration.
  • Stem - One-piece construction with forged T-head - Long service life, smoother operation.


Additional Information:

  • Delivery Time: Ready stock
  • Packaging Details: Loose
Get Best QuoteRequest A Callback
Forbes Marshall Spirax Disc Check Valves

Forbes Marshall Spirax Disc Check Valves

Product Price: Rs 500 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandForbes Marshall Spirax
Size1/2" to 20"
ShapeRound
MaterialCast Iron
Valve Size1/2" to 20"
PressurePN1.0/PN1.6
MediaAir, Water & gas
End ConnectionButt Weld
CertificationIBR
Product Details:
BrandForbes Marshall Spirax
Size1000mm
MaterialWCB
PressurePN1.0 / PN1.6
MediaAir, Water, Gas
End ConnectionScrewed, Socket, Flanged
Description The DCV2 and DCV3 disc check valves are of the wafer pattern designed to be sandwiched between flanges. They are suitable for use on a wide range of fluids for applicators in process lines, hot water systems, steam and condensate systems etc. Face-toface dimensions conform to EN 558 part 1, series 49.

Sizes and pipe connections DN15,20,25,32,40,50,65,80,100 Suitable for installation between BS 10 Tables 'E and ‘H', BS 4504/(DIN) PN6, 10, 16. 25, 40; JIS 5, 10. 16, 20 flanges with the following exceptions: DN40, 50. 80 and 100 - will not fit between JIS 5 flanges DN65 and 80 - will not fit between BS 10 'E' flanges.

Optional extras Heavy duty springs (700 mbar opening pressure, up to DN65) far boiler teed applications. Viton soft seats for oil, gas and steam applications. EPDM soft seats for water applications.

Limiting conditions Note: Special testing to allow lower temperature operation can be provided at extra cost. Consult Spirax Sarco

Additional Information:

  • Delivery Time: Ready Stock
  • Packaging Details: Loose
Get Best QuoteRequest A Callback
WCB Globe Valve

WCB Globe Valve

Product Price: Rs 540 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandAudco
Body MaterialWCB/ Cast Steel/ Carbon Steel
Usage/ApplicationIndustrial
ColorGrey
Driving ModeManual
Test PressurePN 1.0/PN1.6
Connection TypeFlange end
End ConnectionFlange end
Product Details:
Brand Audco
Body Material WCB/ Cast Steel/ Carbon Steel
Usage/Application Industrial
Color Grey
Driving Mode Manual
INDUSTRIAL ENGINEERING SYNDICATE
We Deals In CS Audco Globe Valve, Flange End.

Additional Information:

  • Delivery Time: Ready stock
  • Packaging Details: Loose
Get Best QuoteRequest A Callback
Valves

Valves

Product Price: Rs 350 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Materialcasting
Usage/ApplicationIndustrial
Connector TypeAll type
ColorAll colure
Size1/2" to 24"
BrandSant/ Zoloto/ L&T/ Kirloskar/ Zoloto/ Atam/ Leader/ Audco/ Forbes Marshall Spirax/ SIR/ Kartar
WOG Rating600, 300, 150
valveis a device that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, orslurries) by opening, closing, or partially obstructing various passageways. Valves are technicallyfittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. The word is derived from the Latinvalva, the moving part of a door, in turn fromvolvere, to turn, roll. 


Additional Information:

  • Delivery Time: Ready Stock
  • Packaging Details: Loose
Get Best QuoteRequest A Callback
Cast Iron Butterfly Valve
  • Cast Iron Butterfly Valve
  • Cast Iron Butterfly Valve
  • Cast Iron Butterfly Valve

Cast Iron Butterfly Valve

Product Price: Rs 200 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Size1/2" to 20"
Valve Size200MM
MaterialCast Iron
DiscSS 316 Disk, Cast Iron Disk
End ConnectionFlange End
PressurePN1.0/PN1.6
PowerManual
OperatorLever & Gear opreated
MediaWater, Gas, Air
Temperature Of MediaLow Temperature, High Temperature
Operation TypeBy Gear, By Lever
Product Details:
Usage/Application Industrial
Pressure High Pressure
Valve Size 40"
Material Cast Iron
Brand LP/ Qinn/ Atam/ Sir/ Zoloto/ L&T/ Audco/ Sant/ Zoloto/ Leader/ Kitz
Disc CI
Features & Applications:-
  • Available in Centric Wafer / Lugged design
  • Single, double eccentric design
  • Bubble tight shut off
  • Less wear and tear of seal and longer life
  • Self-cleaning and non-jamming seat design
  • Low operating torque
  • Rigid and sturdy design
  • Ideal for throtting as well as isoltaion Power plants
  • Water supply and sewage
  • Chemical and petrochemical plants
  • Water works
  • Water / Effluent / Sewage treatment plants


Additional Information:

  • Delivery Time: Ready stock
  • Packaging Details: Loose
Get Best QuoteRequest A Callback
Kirloskar CI Non Return Valve
  • Kirloskar CI Non Return Valve
  • Kirloskar CI Non Return Valve

Kirloskar CI Non Return Valve

Product Price: Rs 220 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Valve Size1/2" to 12"
Size1/2" to 12"
MaterialCast iron
BrandSant, Zoloto, L&T, Advance, Audco, Kartar,, Kirloskar, & Kartar
PressurePN1.0/PN1.6
ColorBlack, Grey, Blue, Green, & Red
Product Details:
Model Name/Number 1111
Size 1000mm
Material Cast Iron
Brand Kirloskar
Valve Size 1/2"
Pressure PN1.0 / PN1.6
Media Air, Water, Gas
End Connection Flanged
Product Details:
Brand Kirloskar
Size various sizes
Our company has been involved in manufacturing high quality of C I Non Return Kirloskar Valve. The tools and valves designed in our company cater the broad needs of manufacturing and research enterprises. We have created a robust infrastructure to produce these non return valves at par with the international quality standards. Our valves are appreciated for dimensional accuracy, precision performance and corrosion resistant finish.

Features:

  • Best raw material used for durability
  • Long Life
  • High Performance
  • Our valves are appreciated for dimensional accuracy, precision performance and corrosion resistant finish.


Additional Information:

  • Delivery Time: Ready stock
  • Packaging Details: Loose
Get Best QuoteRequest A Callback
Gun Metal Valve
  • Gun Metal Valve
  • Gun Metal Valve

Gun Metal Valve

Product Price: Rs 60 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandSant, Zoloto, Kartar, Leader & Metro
Size1/2" to 6"
Model Name/NumberDepends on Size
ColorGun Metal
CertificationAs per IS Standard
MaterialGun Metal
Country of OriginMade in India

The company is engaged in the manufacturing and supplying of superlative quality Gunmetal Valves and Bronze castings. These products can be procured as per customer requirements in BS, IS, JIS, DIN, ASTM ,SAE and other international standards. Backed by an advanced in-house Wet lab and online Spectro Meter analysis facility, we are able to offer superior range of products to the customers. These are well known in the market for the following reasons:

 

  • High Ductility
  • Resistance to Corrosion
  • Good Flexibility
  • Heat Resistance
  • Outstanding Material Strength
  • Efficient performance
  • Shock Resistance


Additional Information:

  • Item Code: 8481
  • Delivery Time: Ready Stock
  • Packaging Details: Box
Get Best QuoteRequest A Callback
Forged Steel Valve
  • Forged Steel Valve
  • Forged Steel Valve

Forged Steel Valve

Product Price: Rs 700 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Size1/2"
BrandSant, Zoloto, L&t
MaterialForged Steel
Connector TypeScrewed/ Socket/ Flanged
PressureHigh Pressure
Automation GradeManual
ColorBlack
Product Details:
Size 1000mm
Body Material ForgedSteel
Usage/Application Industrial
Brand PEC
Material Forged Steel
Connector Type Screwed/ Socket/ Flanged
Pressure High Pressure
Automation Grade Manual
  • Bolted body-bonnet design for valves up to Class 800. Valves with welded bonnet also available on request
  • Screwed with seal-welded body-bonnet design for valves of Class 1500
  • Bellows-sealed Gate and Globe valves available in Class
  • 800
  • Bolted body-bonnet joints provided with spiral-wound
  • stainless steel gasket and graphite filler for ma ximum
  • protection against leaks
  • Die-formed graphite inner packing rings and braided
  • graphite end rings with Inconel wire reinforcement and
  • corrosion inhibitor
  • T-head stem-disc connection of gate valve fully meets
  • strength requirements of API 602 and API 598
  • Rolled ACME thread on stem for smooth operation
  • Tapered shoulder on the stem for back seating
  • Self-aligning type gland assembly with stud-and-nut
  • tightening
  • Integral hard-faced body seat for globe and check valves
  • Spring-loaded disc on check valves suitable for non-
  • horizontal applications too
  • Gate and globe valves can be offered with electrical
  • actuators
  • Austenitic SS forging for body and bonnet of Cryogenic
  • valves, resulting in excellent impact strength, minimal heat
  • loss and resistance to corrosion
  • Valves can be offered to NACE MR-0175 and other special
  • NACE requirements
  • Valves can be supplied with IBR certification


  • Additional Information:

    • Delivery Time: Ready Note
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Blow Down Valve
    • Blow Down Valve
    • Blow Down Valve

    Blow Down Valve

    Product Price: Rs 195 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    MaterialCast Iron
    BrandSant
    Usage/ApplicationIndustrial
    PressureHigh Pressure
    Valve Size1/2"
    Size1/2"
    Surface FinishChrome
    Model Name/NumberBDV-0021
    End Connection TypeBDV-002
    We India Pipe & Valve are Importer, Manufacturer & Exporter of Valves.                           

    Additional Information:

    • Item Code: BDV-002
    • Production Capacity: 150000000
    • Delivery Time: Ready Stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Wafer Butterfly Valve
    • Wafer Butterfly Valve
    • Wafer Butterfly Valve

    Wafer Butterfly Valve

    Product Price: Rs 130 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    TypeWafer Type
    Model Name/Number1078-B
    BrandZoloto
    Size1.1/2" to 20"
    MaterialCast Iron
    End ConnectionFlanged
    PressurePN1.6
    Port Size1.1/2"
    PowerManual
    OperatorLever
    MediaAir, Water
    Temperature Of MediaMedium Temperature, High Temperature, Low Temperature
    Operation TypeBy Gear, By Lever
    We India Pipe & valve are Manufacturer, Importer & Exporter for CI Butterfly Valves                                                                          


    Additional Information:

    • Item Code: 107778
    • Production Capacity: 115000000000
    • Delivery Time: Ready Stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Kirloskar Foot Valves

    Kirloskar Foot Valves

    Product Price: Rs 350 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    Size1/2" to 16"
    BrandKirloskar, Zoloto, Sant, Normex & kartar
    MaterialCast Iron
    ColorBlue & Black
    Operating TemperatureDepends on size
    Connection TypeThread
    Product Details:
    Size 1000mm
    Brand Kirloskar, Normex, Zoloto, Sant, Kartar
    Material Cast Iron
    Color Blue, Black, Red
    Connection Type Thread
    These Foot Valves are precision engineered valves which are available in various shapes and sizes with us.

    Features
    :

    • Rigid and sturdy design with minimum loss of head across the valve perfectly flat seating surface for good sealing preventing entry of foreign body to pump through suction pipe long service life

    Range:

    • Conforming to is:4038
    • Size 50mm to 450mm - cast iron


    Additional Information:

    • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A


    Additional Information:

    • Delivery Time: Ready stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Industrial Piston Valves

    Industrial Piston Valves

    Product Price: Rs 750 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    BrandSant, Zoloto, Advance & L&T
    Usage/ApplicationIndustrial
    PressureHigh Pressure
    Valve Size1/2" to 16"
    MaterialCast Iron
    End ConnectionFlange End
    ColorBlack, Blue & Silver
    Product Details:
    Brand PEC
    Material WCB
    Size 250mm
    End Connection Screwed, Flanged, Socket
    Model Name/Number Piston Valve
    Color Grey
    Temperature High

    Our company has sculpted a remarkable place in the market as a reputed manufacturer and exporter of Industrial Piston Valve. Our diligent manpower uses quality grade mild steel to manufacture this valve. This valve is used in chemical, water treatment, pharmaceutical and oil refineries. To provide the flawless range to clients, we check this valve on defined quality parameters. We offer Industrial Piston Valve at reasonable prices.


    Features:

    • Robust construction
    • Can withstand high pressure
    • Corrosion proof


    Additional Information:

    • Delivery Time: Ready Stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Audco Valves
    • Audco Valves
    • Audco Valves

    Audco Valves

    Product Price: Rs 450 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    BrandAudco
    Size/Dimension1/2" to 20"
    PressurePN1.0/PN1.6
    MaterialCast Iron
    Inner Diameter1/2" to 20"
    Materials Of ConstructionCast iron
    Usage/ApplicationAir, Water & Gas
    Product Details:
    Brand Audco
    Size/Dimension 1000mm
    Model Name/Number Audco
    Usage/Application Industrial
    Pressure PN1.0/ PN1.6
    Valve Size 1000mm
    Material Cast Iron

    Audco Valves manufactures a wide variety of Gate, Globe & Check Valves in bolted-bonnet design.The valves are approved by the global majors in oil & gas and power and have a reputation for reliable performance in critical services, across the globe.

    Valves in bolted bonnet construction are available in pressure classes from 150 to 2500, in a variety of materials and end-connections.


    Gate Valves:

    • API 600/ISO 10434
    • 2" to 72"
    • ASME class 150 to 2500

     

    Salient Features:

    • Body and bonnet - Cast with uniform sections, precision machined



    Additional Information:

    • Delivery Time: Ready stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Piston Valve
    • Piston Valve
    • Piston Valve

    Piston Valve

    Product Price: Rs 630 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    BrandUKL/ UniKlinger/ Forbes Marshall Spirax
    Usage/ApplicationIndustrial
    PressureHigh Pressure
    Valve Size1/2" to 6"
    MaterialWCB
    Size150mm
    End ConnectionFlange End
    ColorSilver, Grey
    Temperature890 F
    Product Details:
    Brand UKL/ UniKlinger/ Forbes Marshall Spirax
    Material WCB
    Size 1/2"
    End Connection 150
    Color Silver, Grey
    Temperature 890 F

    Uni Klinger Piston valves, Steam used for secondary heating like Coils, vessels, heat exchangers etc, generate a lot of condensate post heat transfer. This large quantity of condensate can handle by Ball Float Trap. This condensate has a substantial heat component with cost tagged to it. Also this is treated and pure water and can be used as Feed water for the Boiler, saving the cost of heating, Water Bill and Treatment chemicals. Therefore it makes sense to recycle / reuse this condensate. This function is also done by the Ball Float Trap.

    Operating Animation

    UKL Ball Float Trap discharge condensate near to steam saturation temperature, which works on the principle of Buoyancy, [densities difference of Water and Steam].The rising condensate level elevates the Float open the valve and discharges the condensate, and reverse, when the level of condensate drops, valve close the trap.

    The working principle of this trap can also be used as Auto Air Moisture Drain, as Air Eliminator in liquid line, as well as for lifting condensate, as a pump.


     

    Additional Information:

    • Delivery Time: Ready stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Uni-Klinger Globe Valve

    Uni-Klinger Globe Valve

    Product Price: Rs 400 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    BrandUKL
    Body MaterialWCB
    Usage/ApplicationIndustrial
    Ambient Temperature2000 F
    ColorSilver
    Driving ModeManual
    Test PressurePN 1.0/PN1.6
    Connection TypeFlange end
    Nominal Diameter1/2"
    Product Details:
    Brand Uniklinger
    Design Standard
    Body Material WCB
    Usage/Application Industrial
    Color Silver/ Grey
    Driving Mode Manual
    Uni-Klinger Globe Valve in size 1/2" to 20" in Class #150/#300/#600 in leading brand 


    Additional Information:

    • Delivery Time: Ready stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Cast Iron Pulp Valve

    Cast Iron Pulp Valve

    Product Price: Rs 350 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    Size1/2"
    BrandSant/ Zoloto/ Qinn/ Atam
    MaterialCast Iron
    Valve Size1/2" to 20"
    Usage/ApplicationPipe Fitting
    PressurePN1.0/PN1.6
    Body MaterialCast Iron
    MediaWater
    End ConnectionScrewed
    Product Details:
    Material Cast Iron
    Size 200mm
    Brand Sant/ Zoloto/ Qinn/ Atam
    Pressure High Pressure
    Usage/Application Industrial
    Body Material Cast Iron
    Model Name/Number Pulp-200
    We are noteworthy Manufacturer and Trader of supreme grade Knife Gate Valve, Dome Valve, Cast Iron Bend, Ash Handling System, Expansion Bellow and more. These products are widely demanded for their rugged construction. 


    Additional Information:

    • Delivery Time: Ready Stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Cast Iron Reflux Valves

    Cast Iron Reflux Valves

    Product Price: Rs 450 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    BrandSant/ Zoloto/ Kartar/ Zoloto/ Qinn
    Size1/2" to 12"
    MaterialCast Iron
    ColorBlue, Black
    Head ShapeRound & Rectangular
    Country of OriginMade in India
    Features & Applications:-
    • Available in Centric Wafer / Lugged design
    • Single, double eccentric design
    • Bubble tight shut off
    • Less wear and tear of seal and longer life
    • Self-cleaning and non-jamming seat design
    • Low operating torque
    • Rigid and sturdy design
    • Ideal for throtting as well as isoltaion Power plants
    • Water supply and sewage
    • Chemical and petrochemical plants
    • Water works
    • Water / Effluent / Sewage treatment plants


    Additional Information:

    • Delivery Time: Ready stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Thermostatic Steam Traps

    Thermostatic Steam Traps

    Product Price: Rs 100 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    Valve Size25MM
    Model Name/Number1111
    Size25MM
    BrandSpirax/ UKL/ Forbes Marshall
    MaterialForged steel
    PressurePN1.0
    ColorGray or Black

    With the support of our professionals, we have achieved a reliable name as a leading manufacturer and supplier of Thermostatic Steam Traps. These traps are used to discharge condensate and non-condensable gases. The traps open, close or modulate automatically. We manufacture these traps under the firm guidance of expert supervisors using high quality metal, sourced from trusted vendors.Thermostatic Steam Traps come in different sizes and specifications as per client's requirements. We offer these traps at reasonable prices to clients.


    Features:

    • Sturdy and durable
    • Light in weight
    • Corrosion resistant


    Additional Information:

    • Delivery Time: Ready stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Audco Check Valve

    Audco Check Valve

    Product Price: Rs 830 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    Usage/ApplicationIndustrial
    BrandAudco
    MaterialWCB
    Valve Size1/2"
    PressurePN1.0/PN1.6
    MediaAir, Water, Gas
    End ConnectionFlanged
    CertificationIBR
    • Audco Globe Valve offered features superior construction standards and finds use in different areas like power sector and others.
    • These valves come with ASME ‘N’ and ‘NPT’ stamping as well as in other industry standards as demanded by the customers.
    • Some of its features include availability in ½” to 2” in straight pattern and Y-pattern choices, available in different ASME classes as per the patterns, precision construction standards, availability in different construction material choices and others.
    • Our range of globe valve body is comparatively bigger in size and is used to handle more pressure.
    • We have been appreciated by our clients for its features such as dimensional accuracy, precise functioning and durable.
    • Our quality assistants check these globe valve body on well-defined parameters to ensure that these are at par with industrial quality standards.


    Additional Information:

    • Delivery Time: Ready Stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Ball Float Traps

    Ball Float Traps

    Product Price: Rs 450 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    Size1/2"
    BrandSpirax/ UKL/ Forbes Marshall/ Sant/ Zoloto/ Leader/ L&T/ Audco
    Usage/ApplicationIndustrial
    MaterialForged steel
    PressurePN1.0
    ColorGrey

    Steam used for secondary heating like Coils, vessels, heat exchangers etc, generate a lot of condensate post heat transfer. This large quantity of condensate can handle by Ball Float Trap. This condensate has a substantial heat component with cost tagged to it. Also this is treated and pure water and can be used as Feed water for the Boiler, saving the cost of heating, Water Bill and Treatment chemicals. Therefore it makes sense to recycle / reuse this condensate. This function is also done by the Ball Float Trap.

    Operating Animation

    UKL Ball Float Trap discharge condensate near to steam saturation temperature, which works on the principle of Buoyancy, [densities difference of Water and Steam].The rising condensate level elevates the Float open the valve and discharges the condensate, and reverse, when the level of condensate drops, valve close the trap.

    The working principle of this trap can also be used as Auto Air Moisture Drain, as Air Eliminator in liquid line, as well as for lifting condensate, as a pump.


     

    Additional Information:

    • Delivery Time: Ready stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Float Steam Traps

    Float Steam Traps

    Product Price: Rs 500 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    Usage/ApplicationIndustrial
    Valve Size25MM
    Size15MM
    BrandSant/ Kirloskar/ Zoloto/ Qinn/ WJ/ Kartar
    MaterialForged steel
    PressurePN1.0
    ColorGray, Black & Blue
    We Deals In Float Steam Traps in every size in brand Sant/ L&T Audco/ Zoloto/ Qinn/ Kranti/ SIR/ Kartar 


    Additional Information:

    • Delivery Time: Ready Stock
    Get Best QuoteRequest A Callback
    Brass Y Strainer

    Brass Y Strainer

    Product Price: Rs 230 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    MaterialBrass
    Valve TypeScrewed
    MediaWater
    Packaging TypeBox
    Nominal PressurePN1.0
    Size1"
    High efficiency steam strainers for better quality steam.
    • Designed to remove solid particles from the steam supply
    • Reduce levels of contamination
    • Maintain quality of end product.


    Additional Information:

    • Delivery Time: Ready Stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Stainless Steel Gate Valve

    Stainless Steel Gate Valve

    Product Price: Rs 970 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    Valve TypeFlanged
    Size25mm
    BrandAudco, L&T, ZOLOTO, SANT, LEADER
    MaterialStainless Steel
    End Connection TypeFlanged
    Temperature Of MediaHigh Temperature
    End ConnectionFlange end

    Stainless Steel Gate Valve manufactures a wide variety of Gate, Globe & Check Valves in bolted-bonnet design.

    The valves are approved by the global majors in oil & gas and power and have a reputation for reliable performance in critical services, across the globe.

    Valves in bolted bonnet construction are available in pressure classes from 150 to 2500, in a variety of materials and end-connections.


    Gate Valves:

    • API 600/ISO 10434
    • 2" to 72"
    • ASME class 150 to 2500

     

    Salient Features:

    • Body and bonnet - Cast with uniform sections, precision machined.
    • Body: Straight through port without recesses except in the seat area - Minimum resistance to flow, turbulence and erosion.
    • Flex wedge: Guide slots in the wedge engage with integral guide ribs in the body, Stem-to-wedge contact close to wedge centre - Better sealing, smoother operation.
    • Seal-welded seat ring - Eliminates leakage path between seat ring and body, does not loosen up due to temperature fluctuations or vibration.
    • Stem - One-piece construction with forged T-head - Long service life, smoother operation.


    Globe Valves:

    • BS 1873
    • 2" to 24"
    • ASME 150 to 2500

     

    Salient Features:

    • Body and Bonnet - Cast with uniform sections, precision machined.
    • In-situ hard-faced body seat - Eliminates leakage path between seat ring and body.
    • Guided plug-type disc, Free-floating stem-disc connection - Uniform seating.


    Check Valves:

    • BS 1868
    • 2" to 36"
    • ASME 150 to 2500

     

    Salient Features:

    • Body and Bonnet - Cast with uniform sections, precision machined.
    • Body: Permits full swing of disc on downstream side - Lower flow resistance and disc erosion.
    • Disc: Internally-hinged - No opening on the body, higher integrity.
    • Disc secured to hinge using lock nut and pin.
    • Disc free to rotate to avoid localized wear
     

    Additional Information:

    • Delivery Time: Ready Stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Alloy Steel Gate Valve

    Alloy Steel Gate Valve

    Product Price: Rs 680 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    MaterialAlloy Steel
    BrandAudco
    Usage/ApplicationIndustrial
    PressureHigh Pressure
    Valve Size25MM
    Country of OriginMade in India
    India Pipe & Valve. Manufacturer of Gate, Globe & Check Valves.
    We Deals In Alloy Steel Gate Valves.            


    Additional Information:

    • Delivery Time: Ready Stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Sight Glass Valve

    Sight Glass Valve

    Product Price: Rs 430 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    MaterialBrass
    BrandUKL, Kartar
    Usage/ApplicationIndustrial
    PressureHigh Pressure
    Valve Size25MM
    ConnectionScrewed End
    Size1/2"
    Automation GradeManual
    ColorGolden

    The most common application is flow indication. The Sight Glass is fitted in the pipeline to indicate if the fluid is flowing correctly in the line. These can therefore be used to indicate blocked or choked valves or Traps, strainers, pipelines or piping components which otherwise would lead to a decreased level of performance, plant efficiency and safety.

    The sight glasses would indicate if the traps are leaking or passing live steam/vapors.A sight Flow Indicator is a device which is inserted in a run of pipe to observe the flow of fluid in the pipe. To enhance the visibility of the flow, protrusion is often incorporated body of its indicator, in the flow stream, so that fluid impinging on the same, cause turbulence, which indicates flow.

    This enables one to on observing the working of traps and other equipments by giving a clear view of the inside using toughened Borosilicate original Klinger sight glasses.

    • Sizes: 15mm to 50mm
    • Material Of Construction :Carbon Steel
    • Glasses: Toughened Borosilicate
    • Pressure classes: 20 bar ,Temperature max.250Deg C

    Features:

    • No rotating parts-No maintenance
    • Double window-High visibility
    • Easy and quick inspection
    • Used on condensate lines, Oil lines and heat exchangers, in condensers etc.

    Sight Glass


     

    Additional Information:

    • Delivery Time: Ready Stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Thermodynamic Steam Trap

    Thermodynamic Steam Trap

    Product Price: Rs 100 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    BrandUKL/ Spirax/ Forbes Marshall
    Model Name/NumberTD-3
    Size25MM
    MaterialForged steel
    ColorBlack & Silver
    EndsScrewed

    Steam has two components: 1] the latent heat useful in process for Heat transfer, and 2] the Sensible heat in the form of condensate having only the heat content not useful in process, rather hindering Heat transfer and causing damage to piping equipment due to its presence. Hence, there is need to remove condensate and trapped steam. This is done by Steam trap.

    The Thermodynamic Trap works on the principle of difference in the velocities of Steam and Condensate. Used Mainly on Drip lines of the main steam distribution line, uses condensate pressure to open the trap and discharge the condensate and then the Flash steam formed due to the high flash steam velocity & accumulation of flash steam over disc, Device close and trap the live steam when it appears.

    Thermodynamic Steam Trap are compact and lightweight and discharge condensate as and when it is formed.

    Operating Animation

    • Available in Sizes: 15, 20 and 25mm
    • End connections: Threaded to BSP/BSPT/NPT, SW and BW, as well as Flanged to #150/300/600/900/1500. e
    • Pressure Ranges of 30 bar [UTD21], 55 bar TD55 [Single and Three orifices], 100Bar [UTD 62] AND 250 Bar [UTD120]
    • MOC: AISI 420./ 743 Gr. CA40[UTD21/55] / ASTM A217 Gr. WC6[UTD62] / ASTMA 182 Gr. F22 cl3. [UTD120]
    • Max. Operating temperature: 425 Deg. C[UTD55] 550 Deg. C. [UTD62/120]


    Additional Information:

    • Delivery Time: Ready Stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Uniklinger Piston Valve

    Uniklinger Piston Valve

    Product Price: Rs 1,100 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    BrandKlinger
    Usage/ApplicationIndustrial
    PressureHigh Pressure
    Valve Size1"
    MaterialCast Iron
    Size25MM
    End ConnectionFlange end
    ColorSilver
    Temperature360 degree

    Piston valves, Steam used for secondary heating like Coils, vessels, heat exchangers etc, generate a lot of condensate post heat transfer. This large quantity of condensate can handle by Ball Float Trap. This condensate has a substantial heat component with cost tagged to it. Also this is treated and pure water and can be used as Feed water for the Boiler, saving the cost of heating, Water Bill and Treatment chemicals. Therefore it makes sense to recycle / reuse this condensate. This function is also done by the Ball Float Trap.

    Operating Animation

    UKL Ball Float Trap discharge condensate near to steam saturation temperature, which works on the principle of Buoyancy, [densities difference of Water and Steam].The rising condensate level elevates the Float open the valve and discharges the condensate, and reverse, when the level of condensate drops, valve close the trap.

    The working principle of this trap can also be used as Auto Air Moisture Drain, as Air Eliminator in liquid line, as well as for lifting condensate, as a pump.

      • MOC: Cast Iron and Cast Carbon Steel
      • Available in Sizes: 15 mm  50 mm
      • End connections: Screwed/Socket weld ends, Flanged ends to #150 / 300 /600
      • Available for working pressure up to 40 bar and Differential Pressure up to 32 Bar


    Additional Information:

    • Delivery Time: Ready stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Audco Flanged Ball Valve

    Audco Flanged Ball Valve

    Product Price: Rs 150 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    MaterialCast Steel
    Size1/2" to 20"
    BrandAudco
    Usage/ApplicationIndustrial
    PressureHigh Pressure
    Model Name/NumberAFBV-12
    DesignSingle Piece Design
    Connector TypeFlanged End
    Temperature Of MediaHigh Temperature
    WOG Rating150, 600, 300
    Country of OriginMade in India
    This 3-piece Ball Valve is the most easily on-line maintainable in its class. By removing three body connector bolts and loosening the fourth, the body can be swung away using the fourth bolt as the fulcrum, to carry out any installation or maintenance operation on the valve, thus reducing downtime. This valve can be offered in a wide variety of body and seat combinations.

    This 3-piece fire-safe design Ball Valve features a secondary metal seat which enders the valve fire-safe. When the seat is totally sublimated in a fire, the ball moves and rests against the lip, forming a metal-to-metal seat, thus ensuring leak-tightness.

    Additional Information:

    • Item Code: AFBV-001
    • Production Capacity: 157770
    • Delivery Time: Ready Stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Bronze Pressure Reducing Valve
    • Bronze Pressure Reducing Valve
    • Bronze Pressure Reducing Valve

    Bronze Pressure Reducing Valve

    Get Latest Price

    Product Details:
    MediaAir, Waster, Gas, Steam
    MaterialBrass/Bronze
    BrandSant/ Zoloto/ Qinn & Metro
    Valve Size1/2" to 8"
    Size1/2" to 8"
    PressurePn1.0/PN1.6
    Automation GradeAutomatic
    ColorGolden
    Product Details:
    Media Air, Waster, Gas, Steam
    Material Brass/Bronze
    Brand Sant/ Zoloto/ Qinn
    Valve Size 200mm
    Model Name/Number PRV-20
    Size 1/2"
    Automation Grade Manual
    Color Golden
    Brand Qinn /SANT
    Body Material Bronze
    Product Details Spring Loaded With Metallic Diaphragm
    End Details Screwed Female Ends,Bsp Taper Threads To Bs:21
    Testing 500 Psig.(Hyd.)
    Temperature 437 degree F (225 degree C)



    Additional Information:

    • Delivery Time: Ready stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Cast Steel Swing Check Valve

    Cast Steel Swing Check Valve

    Product Price: Rs 740 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    BrandAudco/ L&T/ WJ/ Sant/ Zoloto/ Leader
    MaterialCarbon Steel
    Valve Size1/2"
    PressurePN1.0/PN1.6
    MediaAir, Water, Gas
    End ConnectionF
    Design TypeRoud
    Size1/2"
    CertificationIBR
    We are offering Cast Steel Swing Check Valve to our clients. 


    Additional Information:

    • Delivery Time: Ready Stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Moisture Separator

    Moisture Separator

    Product Price: Rs 250 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    MaterialWCB
    Type Of MachineManual
    PressurePn1.6
    Temperature890f
    Size/Dimension1/2"
    BrandSant
    ColorBlack

    In this field we are recognized amongst trusted manufacturers and suppliers of Moisture Separators. These separators are used in industrial valves for separation of moisture. We manufacture these separators under the firm guidance of expert supervisors using best quality mild steel and cast iron. Highly demanded in the market, these separators come in different sizes and specifications for clients. We offer these Moisture Separators at affordable prices to clients.


    Features:

    • Rust proof
    • Sturdy and durable
    • Easy to mount


    Additional Information:

    • Delivery Time: Read Stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback
    Piston Valve

    Piston Valve

    Product Price: Rs 820 / PieceGet Best Price

    Minimum Order Quantity: 1 Piece

    Product Details:
    BrandKlinger
    Usage/ApplicationIndustrial
    PressureHigh Pressure
    Valve Size1"
    MaterialCast Iron
    Size25MM
    End ConnectionFlange end
    ColorSilver
    Temperature360 degree

    Uni Klinger Piston valves, Steam used for secondary heating like Coils, vessels, heat exchangers etc, generate a lot of condensate post heat transfer. This large quantity of condensate can handle by Ball Float Trap. This condensate has a substantial heat component with cost tagged to it. Also this is treated and pure water and can be used as Feed water for the Boiler, saving the cost of heating, Water Bill and Treatment chemicals. Therefore it makes sense to recycle / reuse this condensate. This function is also done by the Ball Float Trap.

    Operating Animation

    UKL Ball Float Trap discharge condensate near to steam saturation temperature, which works on the principle of Buoyancy, [densities difference of Water and Steam].The rising condensate level elevates the Float open the valve and discharges the condensate, and reverse, when the level of condensate drops, valve close the trap.

    The working principle of this trap can also be used as Auto Air Moisture Drain, as Air Eliminator in liquid line, as well as for lifting condensate, as a pump.

      • MOC: Cast Iron and Cast Carbon Steel
      • Available in Sizes: 15 mm - 50 mm
      • End connections: Screwed/Socket weld ends, Flanged ends to #150 / 300 /600
      • Available for working pressure up to 40 bar and Differential Pressure up to 32 Bar


    Additional Information:

    • Delivery Time: Ready Stock
    • Packaging Details: Loose
    Get Best QuoteRequest A Callback

    EXPLORE MORE CATEGORIES

    Looking For "Industrial Valves and Controllers"?
    Thank youYour Enquiry has been sent successfully.
    © India Pipe & Valve. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.